Rose Electronics VGA to DVI Converter - Manual (Page 12)

8 Installation and Operations Manual
Output Menu
To access the Output Menu, press the Menu button on the front panel. Use
the + or - buttons to highlight the Output Menu icon. Press the Menu button
to enter the Output Menu. Use the + or - buttons to select an output
resolution. Press the Menu button to set the new output resolution.
Figure 4. OSD "Output" Menu
The Native option will select the native resolution of the connected display
based on the EDID from the display.
NOTE : If a resolution that is not supported by the display is selected, then
the output signal will no longer be visible. If this occurs, reset the
unit by removing power from the unit, press and hold the “Menu”
and the “-“ button and reconnect the power. This will reset the unit
and allow you to re-select the output video resolution.
Exit – Exits the “Output” menu and returns to the main menu.