Elmo TND4104X - Manual (Page 4)

3
For fixing the main body with screws.
Used when the white balance is in the PUSH mode.
For setting the vertical sync. phase.
For adjusting the brightness of the image.
For locking the tilt after adjusting the image up/down
direction.
Connect this to output images. When adjusting the image
shooting direction, field angle or focus (in wiring work, for
example), connect a monitor TV, etc.
Image output terminal to be connected to the image input
terminal such as monitor TV.
Connect this to the AC24V 60Hz or DC12V power supply.
Refer to P4.[Selector Switch (Details)]
No.
7
8
9
6
6
12
10
11
13
14
Name Function
Screw hole for
mounting main body
AW PUSH
DOWN/UP
ALC adjustment volume
Tilt lock screw
Monitor terminal
BNC cable
AC/DC power cord
Selector switch 14
13
12
11
10
9
8
7
6