Elmo TND4104X - Manual (Page 6)

5
How to Install
1. Make holes in the mounting surface.
(Fig. 1)(Fig. 2)
2. Unscrew the dome cover screw and dome
cover main body mount screw (Fig. 3).
Be careful not to drop any of the dome
cover screw and dome cover main
body mount screw.
3. Remove the dome cover main body by
turning it counterclockwise (arrow
direction) (Fig. 3).
83.5mm(3.29inch)
46mm(1.81inch)
Center of camera
10mm(0.39inch)
20mm(0.79inch)
Dome cover
main body
mount screw Dome cover
main body
Dome cover
screw
Ceiling/wall/box (Fig. 1)
10mm(0.39inch)
Center of
camera
12
1.2mm(4.77inch)
20mm(0.79inch)
Gang box (Fig. 2)
(Fig.3)
Front of camera
Front of camera