Elmo TND4104X - Manual (Page 8)

7
6. Correct the tilting of the image (Fig. 7).
Be sure to hold the cover motor.
7. Install the cover lens (Fig. 8).
8. Mount the dome cover main body by
matching the dome cover main body mount
screw with the
mark on the main body and
turning it clockwise (arrow direction) (Fig. 9).
If the mount screw does not match with
the mark, the dome cover main body
cannot be installed.
9. Fasten the dome cover main body mount
screw, then cover screw (Fig. 10).
Cover motor Lens
(Fig.7)
(Fig.8)
(Fig.9)
Cover
lens
Main
body
Dome
cover
mainbody
Main body
mark
Dome
cover
main body
mount screw
(Fig.10)
Dome cover
main body
mount screw
Cover
screw
Dome
cover
main body
Dome
cover
main body