TA Triumph-Adler DC 2216 - Manual (Page 129)

Troubleshooting
OPERATION GUIDE 9-9
If paper jams
Stop copying operations when a paper misfeed occurs. When a paper
misfeed occurs, the indicator for the location of the paper misfeed will light
up on the Operation Panel and either “J” plus a 2-digit number will be
displayed as notification of the location of the paper misfeed.
With the Power Switch in the ON (|) position, refer to Removal
Procedure on page 9-9 and clear the paper misfeed.
Misfeed location indicators
1 Paper misfeed in the paper
supply section – Refer to
page9-9.
2 Paper misfeed in the left
cover internal section –
Refer to page9-11.
3 Paper misfeed in the
optional Document
Processor – Refer to
page9-12.
4 Paper misfeed in the optional cassette – Refer to page9-13.
WARNING:
The electrically charged section inside the main unit
of the copier uses high voltage. Exercise caution in handling it to
prevent electric shock.
CAUTION: The fixation section inside the main unit of the copier is
extremely hot. Exercise caution in handling it to prevent getting
burned.
*Do not attempt to reuse paper that has jammed before.
*When a sheet gets torn during removal, make sure that the remnants do
not remain in the machine. Failure to completely remove remnants of torn
pages can lead to paper misfeeds.
*The copier will start warm up operations after the paper misfeed
processing has been completed. The paper misfeed indicator lamp will
go off and the copier will be restored to the state it was in before the paper
misfeed occurred.
Removal Procedure
Paper misfeed in the paper supply section
Paper misfeed in the cassette (J11, J21)
When the paper misfeed has occurred in the cassette, use the procedure
below to clear it.
3
2
1
4