TA Triumph-Adler DC 2216 - Manual (Page 47)

Basic Operation
OPERATION GUIDE 3-7
Interrupt Copying
Interrupt Copying is useful when
you want to make a copy of a
different original at different
settings during copying
operations. After the Interrupt
Copy has been produced, the
copying operation resumes at the
same settings in effect prior to the
interruption.
1 Press [Interrupt]. The Interrupt indicator
will blink. It will stay lit when the Interrupt
operation becomes possible.
2 Temporarily storing the original during copy operations.
3 Set the original for the Interrupt
operation and copy it.
4 After the Interrupt copy has been produced, pressing [Interrupt] will cause
the display to light up. Replace it with the original that had been put aside
and press [Start] to resume copying.
Interrupt copy
is available.