TA Triumph-Adler P-C3060 MFP - Manual (Page 343)

10-24
Troubleshooting > Troubleshooting
S
T
Message Checkpoints Corrective Actions
Reference
Page
Scanner memory is full.
Job is canceled. — Scanning cannot be performed any
more due to insufficient memory.
The job is canceled. Select [OK]. —
Send Error. *1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-18)
— An error has occurred during
transmission. The job is canceled.
Select [OK].
Refer to
Responding to Send Error
for the error code and corrective
actions.
page 10-26
Shake the toner
container. [C][M][Y][K] — Shake the toner container well and
reinstall it. page 10-4
SSD error. Job is
canceled. — An error has occurred on SSD. Job
is canceled. Select [OK].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data. —
Message Checkpoints Corrective Actions
Reference
Page
The slit glass requires
cleaning. — Clean the slit glass using the
cleaning cloth supplied with the
document processor. page 10-2
The toner container is
not locked or improperly
installed. — The toner container is not installed
correctly. Set it correctly. page 10-4
This user account is
locked out.
Contact administrator
Job is canceled. — Contact administrator.
The job is canceled. Select [OK]. —
Toner is low.
[C][M][Y][K]
(Replace when empty.) — It is almost time to replace the toner
container. Obtain a new toner
container. —