Changing security settings, Changing security settings -40 – TA Triumph-Adler P-C3060 MFP User Manual
Page 85
2-40
Installing and Setting up the Machine > Embedded Web Server RX
Changing Security Settings
This section explains how to change the security settings.
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Print the status page to check the machine's IP address and the host name.
[System Menu/Counter] key > [▲] [▼] key > [Report] > [OK] key > [▲] [▼] key > [Report Print] >
[OK] key > [▲] [▼] key > [Status Page] > [OK] key > [Yes]
3
Log in with administrator privileges.
The factory default setting for the default user with administrator privileges is shown below. (Upper
case and lower case letters are distinguished (case sensitive).)
Login User Name:
Admin
Login Password:
Admin
4
Click [Security Settings].