Kyocera Ecosys m2040dn - Manual (Page 350)

10-26
Troubleshooting > Troubleshooting
USB memory error.
Job is canceled. Is writing to a removable memory
prohibited? An error occurred in the removable
memory. The job stopped. Select
the [OK] key.
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to. —
— An error occurred in the removable
memory. The job stopped. Select
[OK].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, the removable memory
is not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory. —
Message Checkpoints Corrective Actions
Reference
Page