Contents introduction, Towing applications – SAF-HOLLAND XL-PH10399OM EH-3050 Series E-Hitch User Manual

Page 2

Advertising
background image

XL-PH10399OM-en-US Rev B · 2013-04-10 · Amendments and errors reserved. © SAF-HOLLAND, Inc.

2

Contents

Introduction

This manual provides the information necessary
for the proper operation and maintenance
of the SAF-HOLLAND EH-3050 E-Hitch.

Towing Applications

Designed for airport ground support and
industrial material handling applications. This
product is not approved by SAF-HOLLAND
for over-the-road use.

NOTE: SAF-HOLLAND reserves the right,

without giving prior notice,
to change specifications and
dimensions as designs are
altered or improved.

IMPORTANT: Keep this manual in

a safe location for
future reference.

Notes, Cautions, and Warnings

You must read and understand all of the
procedures presented in this manual before
starting any work on the E-Hitch.

Proper tools must be used to perform the
maintenance and repair procedures described
in this manual.

NOTE: In the United States, workshop

safety requirements are defined by
federal and/or state Occupational
Safety and Health Act. Equivalent
laws may exist in other countries.
This manual is written based on
the assumption that OSHA or
other applicable employee safety
regulations are followed by the
location where work is performed.

Contents Page

Introduction ..............................................2
Towing Applications ..................................2
Notes, Cautions, and Warnings ..................2
Section 1 – General Safety Instructions .....3
Section 2 – Dimensional Layout and

Parts Identification ..................3

Section 3 – Design and Performance

Specifications .........................4

Contents Page

Section 4 – Model Identification................4
Section 5 – Installation Instructions ..........5
Section 6 – Operating Instructions ............7
Section 7 – Converting Handle ..................8
Section 8 – Maintenance Procedures .........9
Section 9 – Repair Kits and

Ordering Information ............ 11

Throughout this manual, you will notice the
terms “NOTE”, “IMPORTANT”, “CAUTION”,
and “WARNING” followed by product
information. So that you may better
understand the manual, those terms are
defined as follows:

NOTE: Includes additional information

to enable accurate and easy
performance of procedures.

IMPORTANT: Includes

additional

information that if
not followed could
lead to hindered
product performance.

Used without the safety
alert symbol, indicates
a potentially hazardous
situation which, if not
avoided, may result in
property damage.

Indicates a potentially
hazardous situation
which, if not avoided,
may result in minor or
moderate injury.

Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.

Advertising