Epson 3010E - Manual (Page 13)

Setting Up the Projector
13
Keep the projector level and place it at a height where its lens is centered between the top and
bottom of the screen. If this isn’t possible, use the horizontal keystone slider and vertical
keystone buttons to adjust the image (see page 24).
Note: Image quality may be reduced if excessive keystone correction is used.
The size of the image is determined by the distance from the projector’s lens to the screen.
Depending on your display settings and how you use the zoom ring, the actual size may differ.
Use these tables as a guide for projector placement:
16:9 aspect ratio
Projection distance
Diagonal image size
(width × height)
Offset
3.8 to 6.2 feet
116 to 190 cm 40 in. (35 × 20 in.)
101.6 cm (89 × 50 cm) 0 in.
(0 cm)
5.8 to 9.4 feet
176 to 287 cm 60 in. (51 × 30 in.)
152.4 cm (130 × 75 cm) 0 in.
(0 cm)
7.7 to 12.6 feet
235 to 383 cm 80 in. (71 × 39 in.)
203.2 cm (180 × 100 cm) 0 in.
(0 cm)
9.7 to 15.7 feet
295 to 480 cm 100 in. (87 × 47 in.)
254 cm (220 × 120 cm) 0 in.
(0 cm)
11.6 to 18.9 feet
354 to 576 cm 120 in. (106 × 59 in.)
304.9 cm (270 × 150 cm) 0 in.
(0 cm)
14.6 to 23.7 feet
444 to 721 cm 150 in. (130 × 75 in.)
361 cm (330 × 190 cm) 0.3 in.
(1 cm)
17.5 to 28.4 feet
533 to 866 cm 180 in. (173 × 98 in.)
457 cm (440 × 250 cm) 0.3 in.
(1 cm)
Projection distance Offset
Offset refers to distance from
bottom of image to center of
lens.
Diagonal image size
pl3010_3010e_UG.book Page 13 Wednesday, September 7, 2011 6:28 PM