Epson 3010E - Manual (Page 66)

66
Maintenance
8. Gently insert the new lamp into the projector and press the handle down. Tighten the
screws.
Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result
in premature lamp failure.
9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.)
10. Tighten the lamp cover screw.
11. Reset the lamp usage timer, as described on page 67.
pl3010_3010e_UG.book Page 66 Wednesday, September 7, 2011 6:28 PM