Epson 3010E User Manual
Page 44
44
Making Detailed Adjustments
■ RGB
Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).
Use the RGB settings to fine-tune the color of the image. You can adjust the offset and
gain for each signal color (red, green, and blue). Use
Offset
to adjust darker shades and
Gain
for the lightest shades.
■ RGBCMY
Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).
Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color
components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press
Esc
to move to another menu option. You can also access this setting by pressing the
RGBCMY
button on the remote control. See page 35 for more information.
■ Gamma
Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).
You can select from five gamma settings (2.0 to 2.4) or customize your own setting from
your image or a displayed graph. Lower values will increase the contrast of dark areas, but
tend to blur the bright areas. Higher values will darken the light areas. See page 33 for
more information.
Image > Advanced > RGB
Image > Advanced > RGBCMY
Image > Advanced > Gamma
pl3010_3010e_UG.book Page 44 Wednesday, September 7, 2011 6:28 PM