Adjusting rgbcmy – Epson 3010E User Manual
Page 35
Making Basic Adjustments
35
Adjusting RGBCMY
Use this feature to adjust the hue, saturation, and brightness for each of the red (R),
green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components (not available
when
Auto
is selected as the Color Mode).
1. Press the
RBGCMY
button. You see the following displayed on the screen:
2. Use the u or d button on the remote control to select the color you want to adjust, and
press the
Enter
button.
3. Select the
Hue
,
Saturation
, or
Brightness
for that color, and use the l or r button to
make the adjustment.
4. Press
Esc
to adjust another color, or press
RGBCMY
to exit.
Note: You can also adjust the offset and gain using the RGB setting in the projector’s menu
system (see page 44).
pl3010_3010e_UG.book Page 35 Wednesday, September 7, 2011 6:28 PM