Epson 3010E - Manual (Page 56)

56
Using WirelessHD
Using WirelessHD
You can use the included WirelessHD Transmitter (PowerLite Home Cinema 3010e only) to
wirelessly stream HD content from a video device to the projector.
Placing the WirelessHD Transmitter
Place the WirelessHD Transmitter so that the unit’s lights face the front of the projector.
Make sure the transmitter is within 32 feet (10 meters) of the projector and is located in the
same room.
Note: The wireless transmission range may vary depending on the placement and size of
surrounding objects. Avoid placing the transmitter in an area with many large or metal objects and
do not place the transmitter on a metal surface, as this may interfere with the signal.
Use the images below to determine the best placement for the WirelessHD Transmitter (the
shaded areas represent the WirelessHD transmission area):
16 feet (5 m)
32 feet (10 m)
16 feet (5 m)
32 feet (10 m)
pl3010_3010e_UG.book Page 56 Wednesday, September 7, 2011 6:28 PM