EAW UX8800 - Manual (Page 31)

9 EAWPILOT
9 . 1 E x t r a C a p a b i l i t i e s
While the UX8800 interface window in EAWPilot software provides the same capabilities for controlling
the UX8800 as its front panel controls, it also provides additional capabilities not available using the front
panel controls.
9.1.1 LEVEL MONITORING - ANY MODE
The meters in EAWPilot provide more accurate and much higher resolution signal level monitoring.
Both the average and peak levels are easier to read and provide mush better tracking for critical
situations.
9.1.2 PARAMETER LINKING - EITHER MODE
Using the Map tab in the UX8800 interface window, parameter values for the input channels and
the output channels may be linked so that any changes will affect all such linked parameters.
9.1.3 FIRMWARE UPDATE - EITHER MODE
Using the Settings tab in the UX8800 interface window, the firmware program for the UX8800 can
be updated.
9.1.4 RESPONSE GRAPHS - SYSTEM PROCESSOR MODE
The Input Channel and Output Channel tabs provide a frequency response graph showing filter
responses and gain for the selected channel. As well, the Xover tab provides the responses of the
crossover filters.
9.1.5 RESPONSE GRAPHS - LOUDSPEAKER PROCESSOR MODE
The Input Channel tabs provide a frequency response graph showing user-adjustable filter
responses and gain for the selected channel.
9.1.6 OUTPUT PROCESSING - LOUDSPEAKER PROCESSOR MODE
When an input channel is set for generic processing in this mode, the processing parameters for any
output channels to which it is assigned can be adjusted using EAWPilot.
Page 21