EAW UX8800 - Manual (Page 32)

10 MAINTENANCE AND SERVICE
1 0 . 1 M a i n t e n a n c e
The only routine and periodic maintenance for the processor is physical cleaning and performance testing.
10.1.1 CLEANING
Clean the exterior surfaces of the chassis as required, using a soft, dry cloth to remove any dust or dirt.
Remove any dirt from the air intake holes on the side and top of the chassis. Remove any dirt accumulated
on the ventilation fan grille.
CAUTION: To avoid damaging the exterior finishes or internal circuitry do not use any liquid,
cleaning solvents, or abrasives.
While the interval between cleanings will depend on the frequency of usage and the conditions of use, it is
recommended that cleaning be performed at least once a year. Clean more often if used in dusty or dirty
conditions, such as part of a portable or touring system.
10.1.2 PERFORMANCE TESTING
Perform listening tests and/or formal measurements, checking all processor functions for proper operation.
While the interval between testing will depend on the frequency of usage and the conditions of use, it is
recommended that should be performed at least once every six months. Test more often if used in
conditions that subject the unit to mechanical stress, such as part of a portable or touring system.
1 0 . 2 S e r v i c e
There are no user serviceable parts inside the UX8800 processor. In case of failure, refer all servicing to the
factory. Service and repair information may be obtained by contacting the EAW Service Department or the
EAW distributor for your country.
1 0 . 3 R e t u r n a n d R e p a i r I s s u e s
UX8800 repairs can be done either through an EAW distributor, EAW authorized service center, or by
shipping the product to EAW Service. Prior to returning any product to EAW, an RA (Return
Authorization) issued by EAW is required. Contact the EAW Service Department for details.
1 0 . 4 H o w To C o n t a c t E AW
We have tried to answer most questions you may have about the UX8800 in this manual. Should you need
further assistance, please do not hesitate to contact us. You can contact EAW in several different ways:
General and Application Suppor t Group
Eastern Acoustic Works Tel 800 992 5013
One Main Street Tel +1 508 234 6158
Whitinsville, MA 01588 USA Fax +1 508 234 8251
Fax 800 322 8251
Web Site www.eaw.com
Ser vice
EAW Service Department Tel 800 992 5013
Building #11 Tel +1 508 234 6158
One Main Street Fax +1 508 234 3776
Whitinsville, MA 01588 USA
e-mail
General information [email protected]
Applications Support Group [email protected]
Service [email protected]
Page 22