Avago Technologies AcceleRAID 160 - Manual (Page 25)

Hardware Installation
Manual No. DB11-000021-00 13
Connecting Both Internal and External SCSI Devices
A combined installation showing internal and external devices with proper
termination is illustrated in Figure 13.
☛
Note
A combined configuration using both internal and
external connectors works best with high quality
cables. It is recommended that you use an
Amphenol® Fast LVD and a Hitachi® twisted pair,
flat cable in this unique setup.
Figure 13. Connecting Both Internal and External SCSI Devices
The hardware portion of the installation is complete.
Please see the following section titled “What to Do Next.”
What to Do Next
1. Use RAID EzAssist to create an automatic or a custom RAID
Configuration.
Refer to the RAID EzAssist Configuration Utility Quick Configuration
Guide or RAID EzAssist Configuration Utility User Reference Guide.
2. Install the AcceleRAID 160 controller drivers appropriate for your
server’s network operating system.
Refer to the PCI Disk Array Controller Drivers Installation Guide and