Mpman FRA202 - Manual (Page 6)

8. When you set the Alarm 2, just follow the above step 2 to 7 by using the ALARM 2 (7) instead of
ALARM button (6). Subsequently, the wake to buzzer status of alarm 2 will be indicated by Alarm 2
Buzzer indicator (11). The wake to radio status of alarm 2 will be indicated by Alarm 2 Radio indicator
(12).
9. When the Alarm is turned on, either :
A) Press ON/OFF button (1) once to switch off the alarm. You can see that the alarm indicator is
still on, implying the alarm function is still activated and turned on again after 24 hours.
B) Press the SNOOZE/SLEEP button (5), the alarm sounds will stop temporarily for 9 minutes and
will sound again after. [See SNOOZE SETTING below]
C) If no button is pressed after the alarm sounds, the alarm will keep turned on and then turned
off in 1 hour after the alarm time.
D) To disable the alarm setting, press ALARM 1 button (6) or ALARM 2 button (7) until their
indicators (radio or buzzer) disappear on the display.
Notes
The ALARM 1 (or 2) indicator flashes in the display when the alarm sounds.
If a later alarm starts to sound when the earlier alarm still sounds, then the later alarm takes
priority.
If a later alarm sounds when the earlier alarm is under SNOOZE period, then the later alarm takes
priority and will cancel the SNOOZE function of the earlier alarm automatically.
If the same time is set for both alarm (ALARM 1 or 2). The ALARM 2 takes priority.
SNOOZE SETTING
Once the alarm is activated, the snooze function can be used to stop the alarm temporary for about 9
minutes and then alarm will sound again.
1) Once alarm ( either Alarm 1 or Alarm 2 ) sounds, press the SNOOZE / SLEEP button (4), the buzzer
or radio alarm sounds will stop and will sound again after about 9 minutes. The SNOOZE
function can maintain within 1 hour from the set alarm time.
2) During the time when SNOOZE function is activated, the alarm indicator will flash.
3) To switch off the SNOOZE function, simply press ON/OFF button (1) once.
You can then see the alarm indicator stop flashing, and the alarm will not sound
again after the snooze period elapse.
SETTING THE SLEEP TIMER
The sleep function allows the radio to play in blocks of 10, 20, 30, 40, 50, 60, 70, 80, or 90 minutes, and
then being turned off automatically, thus, you can enjoy falling asleep when listening the radio.
1) Turn off the radio.
2) Press the SLEEP / SNOOZE (5) button, then the radio is turned on with the display showing 90 ( for