Mpman XRM34 - Manual (Page 7)

UK-6
RANDOM PLAY(on the remote control)
1. Press the RANDOM button once , and then RANDOM is displayed.(F17)
2. Press the RANDOM button once again, and then resume to normally play.
INTRO PLAY(on the remote control)
1. Press the INTRO button once, and then INTRO is displayed. The main unit will play the first 10 seconds of each
track.(F18)
2. Press the INTRO button twice, and then resume to normal play.
PROGRAM MODE
User can make the program up to 32 tracks in CD mode or 64 tracks in MP3/WMA/USB/SD CARD mode in any
desired order. Program mode is activated while in stop mode.
1. How to play the program
- CD
1) Press the MEM/C-ADJ. button, shift to PROGRAM mode.(F19)
2) Press the SKIP/TUNER SEARCH(UP or DOWN) button, the track number will be changed.
3) Press the MEM/C-ADJ. button to confirm the track number.
- MP3/WMA/USB/SD CARD
1) Press the MEM/C-ADJ. button, shift to PROGRAM mode. The album number is flashing. (F20)
2) Press the PRESET/FOLDER button, the album number will be changed.
3) Press the MEM/C-ADJ. button , the track number is flashing.(F21)
4) Press the SKIP/TUNER SEARCH button, the track number will be changed.
5) Press the MEM/C-ADJ. button to confirm the track number.
F17 F18
F21
F19 F20
- MP3/WMA
1. Press the REPEAT button once , then REPEAT is displayed. It will play the current track repeatedly.(F14)
2. Press the REPEAT button twice, REPEAT ALL is displayed. It will play all tracks repeatedly.(F15)
3. Press the REPEAT button thrice, then REPEAT ALBUM is displayed. It will play repeatedly the current
album. (F16)
4. Press the REPEAT button four times, then REPEAT function will be off.
F14 F15
F16
2. PROGRAM PLAY
Press the PLAY/PAUSE button on the unit (or remote control), it will be play starting with the first track of the
program. When all tracks have been played, the unit display will show the number of tracks and the playing time of
the CD/MP3/WMA tracks.
3. CANCEL PROGRAM
1. Press the STOP button once, or open the CD tray door and close it again then the memory will be erased.
2. Set a new program, the existing one will be cleared.
Note : During in the program mode.
1. Press the "REPEAT" button once, the "REPEAT" indicator will light on the display. Then the main unit will repeat
the current track.
2. Press the “REPEAT" button twice, the "REPEAT ALL" will light on the display. Then the main unit will repeat all
the total number of tracks.
3. Press the “REPEAT” button once more again. The main unit will return to play the program normally.
AUX IN PLAY
The AUX input is located
of the unit. Use a 3.5mm stereo jack cable to connect audio equipment
through the LINE IN jack.
on the left hand side