PLANET WGS3-24240 User Manual
Page 233
User’s Manual of WGS3-24000 / WGS3-24240
233
Default value is weighted.
• Queue Management
Type
Queue depth management technique used for queues on this interface. This is
only used if device supports independent settings per-queue.
Queue Management Type can only be one of the following:
taildrop
Default value is taildrop.
• Restore Defaults for All
Queues button
Restores default settings for all queues on the selected interface.
• Submit button
Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.
4.5.5.6 Interface Queue Status
Figure 4-5-31 CoS Interface Queue Status
Selection Criteria
Object
Description
• Slot/Port
Specifies all CoS configurable interfaces. The option "Global" represents the
most recent global configuration settings. These may be overridden on a
per-interface basis.