PLANET WGS3-24240 - Manual (Page 546)

User’s Manual of WGS3-24000 / WGS3-24240
546
13.3.15 show ip igmp
This command displays the system-wide IGMP information.
▫ Format show ip igmp
▫ Modes Privileged EXEC User EXEC
IGMP Admin Mode This field displays the administrative status of IGMP. This is a configured value.
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes
Interface Mode This field indicates whether IGMP is enabled or disabled on the interface. This is a
configured value.
Protocol State This field indicates the current state of IGMP on this interface. Possible values are
Operational or Non-Operational.
13.3.16 show ip igmp groups
This command displays the registered multicast groups on the interface. If “detail” is specified this command displays the
registered multicast groups on the interface in detail.
▫ Format show ip igmp groups <unit/slot/port> [detail]
▫ Mode Privileged EXEC
If detail is not specified, the following fields are displayed:
IP Address This displays the IP address of the interface participating in the multicast group.
Subnet Mask This displays the subnet mask of the interface participating in the multicast group.
Interface Mode This displays whether IGMP is enabled or disabled on this interface.
The following fields are not displayed if the interface is not enabled:
Querier Status This displays whether the interface has IGMP in Querier mode or Non-Querier mode.