PLANET WGSW-48040HP - Manual (Page 158)

Command Guide of WGSW-48040HP
Switch (config-if-vlan)# ipv6 mld snooping unsolicited-report-interval 99
4.2.46.28 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function for specific interface
Example:
To disable the function (ip address dhcp) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# no ip address dhcp
4.2.47 ip arp inspection
Command:
ip arp inspection
ip Internet Protocol
arp Address Resolution Protocol
inspection ARP inspection
Default:
N/A
Usage Guide:
To enable ARP inspection
Example:
To enable ARP inspection
Switch# configure terminal
-158-