PLANET WGSW-48040HP - Manual (Page 174)

Command Guide of WGSW-48040HP
<HEX-VALUE> Hex values in 64 octets
Default:
None
Usage Guide:
To configure Vendor ID and info of DHCP Server
Example:
To configure Vendor ID and info as below table of DHCP Server for pool “planetbestswitch”
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)# vendor class-identifier "0x8" specific-info 0x8
4.2.54 ip dns proxy
Command:
ip dns proxy
ip Internet Protocol
dns Domain Name System
proxy DNS proxy service
Default:
Disabled
Usage Guide:
To enable DNS proxy.
Example:
To enable DNS proxy.
Switch# configure terminal
Switch (config)# ip dns proxy
4.2.55 ip helper-address
Command:
ip helper-address <Ip : ipv4_ucast>
-174-