PLANET WGSW-48040HP - Manual (Page 203)

Command Guide of WGSW-48040HP
meters Specify the altitude in meters.
Default:
0
Usage Guide:
To configure altitude of LLDP-MED
Example:
To configure altitude (Floors 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv altitude floors 5
4.2.88 lldp med location-tlv elin-addr
Command:
lldp med location-tlv elin-addr <ELIN number>
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
elin-addr Emergency Location Identification Number, (e.g. E911 and others), such as defined by TIA or NENA.
<ELIN number> ELIN value
Default:
0
Usage Guide:
To configure Emergency Location Identification Number of LLDP-MED
Example:
To configure Emergency Location Identification Number (911) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv elin-addr 911
4.2.89 lldp med location-tlv latitude
Command:
lldp med location-tlv latitude north <Degrees> | south <Degrees>
-203-