PLANET MAP-3100 - Manual (Page 45)

n. If you select to edit existing DHCPD, a page similar to Figure 3.4.1.2 with configured
settings will be displayed.
3.4.2 Service > Firewall
(MAP-3100 only)
Firewall is used to allow or deny data either in or out. Firewall configuration page is shown in
Figure 3.4.2.1.
Figure 3.4.2.1: Firewall configuration page
To configure Firewall:
a. Click on “Active” drop down menu to enable or disable Firewall service.
b. Click on top “Apply” button to confirm enable or disable Firewall service. New
settings are active after the device reboot.
c. From “Configure” field, you can “Modify” or “Remove” Firewall.
d. If you select to add new Firewall entry, Firewall – add page will display as shown in
Figure 3.4.2.1
Page 45 of 102