PLANET IPX-2100 - Manual (Page 14)

14
Step 2. Edit your ETH port IP information.
There are three types of Ethernet port connection. They are Static IP, PPPoE
(Point-to-Point Protocol over Ethernet), DHCP. You can find detailed setting process
in the user manual.
Selection of IP Connection Type
2.3.3 Changing IP Address or forgotten admin password
To reset the IP address to the default IP Address “192.168.0.1” (ETH) or reset the
login password to default value. Press the reset button on the front panel for more
than 6 seconds. After the device is rebooted, you can login the management WEB
interface within the same subnet of 192.168.0.xx.
Reset Button
Console ETH
Reset
12V DC
Note
After pressing the “Reset” button, all the system data will be reset
to default; if possible, back up the config file before resetting.