PLANET IPX-2100 - Manual (Page 3)

3
1. IPX-330
1.1. Package Contents
Thank you for purchasing PLANET Internet Telephony PBX system, IPX-330. This
Quick Installation Guide will introduce how to finish the basic setting of connecting
the web management interface and the Internet. Open the box of the Internet
Telephony PBX system and carefully unpack it. The box should contain the following
items:
IPX-330 x 1 l
Quick Installation Guide x 1 l
User’s Manual CD x 1 l
Power Adapter x 1 (12V DC) l
RJ-45 x 1 l
If any of the above items are damaged or missing, please contact your dealer
immediately.
1.2. Hardware Installation
The following are instructions for setting up PLANET IPX-330. Refer to the
illustration and follow the simple steps below to quickly install your Internet
Telephony PBX system.
1.2.1 Safety Instructions
The following are the safety instructions for Internet Telephony PBX system before
installing.
 The maximum operating temperature of the IPX-330 is -10~45°C, which allows
sufficient air circulation.
 The connections and equipment that supply power to the IPX-330 should
be capable of operating safely with the maximum power requirements of the
IPX-330. In the event of a power overload, the supply circuits and supply wiring
should become hazardous.
 The power adapter must plug into the right supply voltage. Make sure that the
supplied power voltage is correct and stable. If the input power voltage is over
10% lower than the standard, it may cause the IPX-330 to malfunction.
 Generally, when installed after the final configuration, the product must comply
with the applicable safety standards and regulatory requirements of the country
in which it is installed. If necessary, consult for technical support.