PLANET IPX-300 - Manual (Page 14)

1
STEP 5: Please take VIP-192 and setup the wireless network to connect with IP
PBX (IPX-300W) by keypad menu method. Then log in VIP-192 via web browser
and browser to
“SIP Settings” configuration menu. Insert the Register and
Outbound Proxy IP Address information.
The IP address
of IP PB X
Figure 17. SIP settings of VIP-192
Then browse to “SIP Account Settings” configuration menu and fill in the account/
password information. The sample configuration screen is shown below:
Dat a match with Fi gure 15. IP
PBX’s extensio n settings
Figure 18. SIP account settings of VIP-192
STEP 6: After both of devices have registered to IP PBX successfully, it could
browse to
“Information ⁄ PBX Extension Status” page to show the registration
status:
Figure 19. Extension status
Test the scenario:
1. VIP-154T pick up the telephone
2. Dial the number: 100 (VIP-192) shall be able to connect to the VIP-192