PLANET VIP-1680 - Manual (Page 21)

STEP 4: Outgoing Dialing Plan
The purpose of “Outgoing Direct Call” setting is to let user create a proprietary dialing plan when this
Gateway is not registered to any H.323 Gatekeeper or any SIP proxy server. This setting can also
assign some dialing plan to local ports (including prefix strip, prefix addition).
Through this setting, user can directly map a number to a specific gateway (IP address).
In the “Outgoing Dial Plan” settings: Maximum Entries : 50
“Leading Number” is the leading digits of the dialing number.
“Min Length” and “Max Length” is the min/max allowed length you can dial.
“Strip Length” is the number of digits that will be stripped from beginning of the dialed
number.
“Prefix Number” is the digits that will be added to the beginning of the dialed number.
“Destination” is the IP address of the destination gateway that owns this phone number
STEP 5: Finishing the Wizard Setup
After completing the Wizard Setup, please click “Finish” bottom. The VIP-GW will save the
configuration and rebooting gateway automatically. After 20 Seconds, you could re-login the machine.
21