PLANET ADW-4100 - Manual (Page 21)

System Configuration
15
connection handshake. The default value is 1432.
Authentication
When AUTO option is chosen, the PAP mode will run first then CHAP.
Automatic Reconnect
If you check this option, the Disconnect Timeout should set to 0 second. Otherwise
there will be a conflict between them.
DHCP
Leave this option unchecked.
Figure 4-8: PPP setting Screen
Step 3
Click on
“NAT” tab on left panel, and enable the NAPT function in the option menu.
Step 4
Click
“Save settings” on left panel to write configuration into machine, and reboot
to make settings effective.