PLANET ADW-4100 - Manual (Page 32)

ADW-4100 User Manual
26
requests of your network, ADW-4100 will forward those requests to the appropriate
computer. (Note: DHCP function must be disabled or the local server itself has to
be fix-IP addressed to use this function.)
This function is generally used to set up a web server, ftp server, or e-mail server
on your network. Figure shows the screen of Virtual Server Configuration page,
To add a Virtual Server:
Step 1
Select the public port number used by the service, ranged from 0 to 65535.
Step 2
Select the private port number used on internal server mapping to public port, it is
not required to be the same as public port number.
Step 3
Select appropriate communication type via type of port checkbox.
Step 4
Enter the Host IP Address of local server that you want the Internet users to be
able to access.
Step 5
Click the
“Add This Setting” button to save the settings.
Step 6
Click
“Save settings” on left panel to write configuration into machine, and reboot
to make settings effective.
Figure 4-20: Virtual Server Configuration Screen