Epson AcuLaser C3000 - Manual (Page 135)

Setting Up Your Printer on a Network 135
R4CE640
long.bk
Rev. E
A5 size SETUP.FM
6/10/04
R Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
5
5
5
5
5
5
5
5
5
5
5
5
Note:
The name of the shared printer may be changed by the computer or
server that is connected to the shared printer. To make sure of the
name of the shared printer, ask the administrator of the network.
6. Click Next.
Note:
❏ If the printer driver is installed in the client beforehand, you
need to select the new printer driver or the current printer
driver. When the prompt to select the printer driver appears,
select the printer driver according to the message.
❏ If the printer server’s OS is Windows Me, 98, or 95 or the
additional driver for Windows Me, 98, or 95 is installed in the
Windows XP, 2000, NT 4.0, or Server 2003 printer server, go
to the next step.
❏ If the additional driver for Windows Me, 98, or 95 is not
installed in the Windows XP, 2000, NT 4.0, or Server 2003
printer server, go to “Installing the printer driver from the
CD-ROM” on page 141.
7. Make sure of the name of the shared printer, and select
whether to use the printer as the default printer or not. Click
Next, and then follow the on-screen instructions.
Note:
You can change the shared printer’s name so that it appears only on
the client computer.
With Windows XP or 2000
Follow these steps to set Windows XP or 2000 clients.
You can install the printer driver of the shared printer, if you have
Power Users or more powerful access rights even if you are not
the Administrator.