Epson AcuLaser C3000 - Manual (Page 230)

230 Troubleshooting
R4CE640
long.bk
Rev. E
A5 size TROUB.FM
6/10/04
L Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
The interface cable may not be
plugged in securely. Check both ends of the interface cable
between the printer and the computer.
You may not be using the
correct interface cable. If you are using the USB interface, use a
Revision 2.0 cable.
Some error may have
occurred. Check the LCD panel to see if an error
message appears.
Your application software is
not properly set up for your
printer. Make sure that the printer is selected in
your application software.
Your computer system’s
memory is too small to handle
the volume of data in your
document. Try reducing the image resolution of
your document in the application
software, or install more memory in
your computer if you can.