Epson AcuLaser C3000 - Manual (Page 260)

260 Troubleshooting
R4CE640
long.bk
Rev. E
A5 size TROUB.FM
6/10/04
L Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
Manual Feed xxx
The manual feed mode is specified for the current print job. Make
sure the paper size indicated by xxx is loaded, then press the N
Start/Stop button.
For details on the manual feed mode, see “Manually feeding
paper” on page 30.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the N Start/Stop button on the control panel to resume
printing. Or press the q Cancel Job button to cancel the print job.
Menus Locked
This message appears if you try to change the printer’s settings
through the control panel when the buttons are locked. You can
unlock them by using the EPSON WinAssist or WebAssist utility.
Refer to the Network Guide for information.
NonGenuine Toner xxxx
The installed toner is not an EPSON genuine toner cartridge.
Using a non-genuine toner cartridge may affect print quality.
EPSON shall not be liable for any damages or problems arising
from the use of consumable products not manufactured or
approved by EPSON. Installing a genuine toner cartridge is
recommended. Press the N Start/Stop button on the control panel
to resume printing.
Offline
The printer is not ready to print. Press the N Start/Stop button.
In this mode, the remaining amount of the toner cartridge for each
color is displayed in seven levels.