ProSoft Technology PTQ-104S - Manual (Page 189)

48TPTQ-104S Rev 1 ♦ 47TQuantum Platform Reference
46TIEC 60870-5-104 Server for Quantum 12TUser Manual
Parameter loading
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Threshold value
 Smoothing factor
 Low limit for transmission of measured value
 High limit for transmission of measured value
Parameter activation
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Act/deact of persistent cyclic or periodic transmission of the addressed
object
Test procedure
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Test procedure
File transfer
(Station-specific parameter, mark "X" if function is used)
File transfer in monitor direction

Transparent file

Transmission of disturbance data of protection equipment
 Transmission of sequence of events
 Transmission of sequence of recorded analogue values
 File transfer in control direction
 Transparent file
Background scan
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Background scan
Definition of time outs
Parameter Default Value Remarks Selected Value
t
0
60 seconds Time-out of connection establishment 60 seconds
t
1
15 seconds Time-out of send or test APDUs
ProSoft Technology, Inc. Page 189 of 201
March 4, 2013