ProSoft Technology 5301-MBP-ASCII User Manual
Page 24
MBP Protocol Configuration
MBP ♦ ProLinx Gateway
Protocol Manual
Modbus Plus
Page 24 of 52
ProSoft Technology, Inc.
May 12, 2011
3.2
[Modbus Plus Device Definition]
The Modbus Plus Device Definition portion of the file represents the roadmap to
get data from one destination to the next. If the Modbus Plus is going to be
configured to operate in the Global In and/or Master Command modes, the
Modbus Plus Device Definition file must be set up. This file allows the user to
configure specific operating parameters for each device on the Modbus Plus
network.
Each Modbus Plus device on the network must be defined in the [Modbus Plus
Device Definition] section of the configuration file. The table starts after the
START label and continues until the END label.
Example
Parameter Description
The following section lists the parameters.