Logging into the prolinx unit – ProSoft Technology 5201-104S-103M User Manual
Page 32
Advertising
Web Server
FTP Server
Page 32 of 35
ProSoft Technology, Inc.
September 28, 2005
6.1
Logging into the ProLinx unit
Logging into the ProLinx FTP Server is security protected by the user-configured
password in the module's CFG file (in [MODULE] header section). By default the
password protection is disabled. Note the following:
1
If the password is not enabled, then an FTP client can log into the FTP server
using:
USERNAME = 'guest'
PASSWORD = any email address (ex: [email protected])
2
If enabled, then the password entered in the [MODULE] section's password
parameter must be entered. Note that this is case sensitive.
Advertising