Sony CMT-X3CD - Manual (Page 17)

17 GB
Li
st
e
n
in
g
t
o
m
u
si
c t
h
ro
u
g
h
a
B
L
U
ET
O
O
T
H
co
n
n
e
c
tio
n
Pairing the system
with a BLUETOOTH
device and listening
to music
You can listen to music from BLUETOOTH
device over a wireless connection.
Before using the BLUETOOTH function,
perform pairing to register your BLUETOOTH
device.
Note
 Place the BLUETOOTH device to be connected
within one meter of the system.
 If your BLUETOOTH device is compliant with
touch (NFC), skip the next procedure. See
“Listening to music by one-touch action (NFC)”
(page 19).
1
Press BLUETOOTH MENU
.
If the BLUETOOTH function is selected
when the system has no pairing
information, the system enters the
pairing mode automatically.
You can also perform pairing by using a
button on the unit. See “To perform the
pairing by using a button on the unit”
(page 17).
2
Press
/ to select “PAIRING,”
then press
.
The system enters pairing mode.
“PAIRING” appears on the display
window
 and the (BLUETOOTH)
indicator
 blinks quickly.
3
Search for this system with the
BLUETOOTH device.
A list of the devices found may appear
on the BLUETOOTH device display.
4
Select [SONY:CMT-X3CD] (this
system).
If prompted to enter a passkey on the
BLUETOOTH device, enter “0000.”
If this system is not shown in the
display window of the device, proceed
from step 1 again.
When pairing is completed, the
BLUETOOTH connection is established
automatically. “BT AUDIO” appears on
the display window
 of the system
and the (BLUETOOTH) indicator

lights up.
Perform this step within 5 minutes, or
the pairing is canceled. If the pairing is
canceled, proceed from step 1 again.
5
Press
 .
Starts playback.
Depending on the BLUETOOTH device,
press
  again. Also, you may have
to start up a music player on the
BLUETOOTH device.
6
Press VOLUME +/–
 to adjust
the volume.
If the volume cannot be changed on
the system, adjust it on your
BLUETOOTH device.
To perform the pairing by using a
button on the unit
1 Press FUNCTION
 repeatedly to select “BT
AUDIO.”
2 Press and hold FUNCTION
 until the
(BLUETOOTH) indicator
 starts to blink fast.
The system enters pairing mode. “PAIRING”
appears on the display window
.
To establish a BLUETOOTH connection,
perform the same procedures after step 2
using a remote.
Tip
 You can perform a pairing operation with
another BLUETOOTH device while the
BLUETOOTH connection is established with one
BLUETOOTH device.
Listening to music through a
BLUETOOTH connection