Sony CMT-X3CD - Manual (Page 21)

21 GB
A
d
d
it
ion
al
i
n
fo
rm
at
io
n
Setting the
BLUETOOTH Standby
mode
When BLUETOOTH Standby mode is
enabled, the system enters Wait mode for
BLUETOOTH connection even when the
system is turned off. This mode is disabled
by default.
1
Press BLUETOOTH MENU
.
2
Press
/  to select “BT: STBY,”
then press
.
3
Press
/  to select “ON” or
“OFF,” then press
.
4
Press /  to turn off the
system.
Tip
 When this mode is set to “ON,” the system turns
on automatically and you can listen to music by
making a BLUETOOTH connection from a
BLUETOOTH device.
Note
 When the system has no pairing information,
this mode is not available. To use this mode, the
system needs to be connected to the device and
has its pairing information.
Setting the wireless
BLUETOOTH signal
ON/OFF
When the unit is turned on, you can control
a BLUETOOTH signal. The default setting is
ON.
1
Turn on the unit.
2
Press and hold
  and VOL+
 on the unit for 5 seconds.
3
After “BT OFF” (wireless
BLUETOOTH signal is off) or “BT
ON” (wireless BLUETOOTH signal
is on) appears, release the
button.
Tip
 When this setting is set to OFF, the BLUETOOTH
function is not available.
 If the unit is touched with a smartphone/tablet
with NFC function when this setting is off, the
system is turned on and this setting changes to
ON.
 When this setting is off, the BLUETOOTH Standby
mode cannot be set.
 When this setting is off, the unit and
BLUETOOTH device cannot be paired.