Specifications, Inputs/outputs – Sony CMT-X3CD User Manual

Page 31

Advertising
background image

31

GB

Pr
ec
a

u

tions
/

S

p

ec
if

ic

at

io

ns

 BLUETOOTH devices connected with this system

must comply with the BLUETOOTH specification
prescribed by the BLUETOOTH SIG, Inc., and
must be certified to comply. However, even
when a device complies with the BLUETOOTH
specification, there may be cases where the
characteristics or specifications of the
BLUETOOTH device make it impossible to
connect, or may result in different control
methods, display or operation.

 Noise may occur or the audio may cut off

depending on the BLUETOOTH device connected
with this system, the communications
environment, or surrounding conditions.

Specifications

Amplifier section

Power output (rated):

8 watts + 8 watts (at 8 ohms, 1 kHz, 1% THD)

RMS power output (reference):

10 watts + 10 watts (per channel at 8 ohms,
1 kHz)

Inputs/Outputs

AUDIO IN:

AUDIO IN (external input) jack:
Stereo mini jack, sensitivity 1 V, impedance
47 kilohms

USB:

USB port: Type A, 5 V DC 1.5 A

HEADPHONE jack:

Stereo standard jack, 8 ohms or more

CD-DA/MP3/WMA player section

System:

Compact disc and digital audio system

Laser Diode Properties:

Emission Duration: Continuous
Laser Output*: Less than 44.6 μW

* This output is the value measurement at a

distance of 200mm from the objective lens
surface on the Optical Pick-up Block with 7mm
aperture.

Frequency response:

20 Hz - 20 kHz

Signal-to-noise ratio:

More than 90 dB

Dynamic range:

More than 90 dB

Tuner section

FM tuner section:

FM stereo, FM superheterodyne tuner

Tuning range:
87.5 MHz - 108.0 MHz (50 kHz step)

Advertising