Yamaha YDP-S52 - Manual (Page 12)

Setting Up
12
YDP-S52 Owner’s Manual
1.
Connect the plugs of the AC adaptor in the order shown in
the illustration.
WARNING
Use the specified adaptor (page 33) only. The use of other adaptors may result in irreparable
damage to both the adaptor and the instrument.
CAUTION
Remove the AC plug from the AC outlet when the instrument is not to be used for extended
periods of time, or during electrical storms.
NOTE
Follow this procedure in reverse order when disconnecting the AC adaptor.
2.
Press the [ ] (Standby/On) switch to turn the power on.
Power indicator
If you close the key cover without turning the power to standby, the power
indicator remains lit, indicating that the power is still on.
When you’re ready to turn the power to standby, press the [
] (Standby/On)
switch again for a second. The power indicator turns off.
CAUTION
Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the
instrument at a minimum level. When not using the instrument for an extended period of time, be
sure to unplug the power cord from the wall AC outlet.
Turning the Power On
Power cord
AC outlet
AC adaptor
DC IN jack (page 10)
The shape of the plug and outlet
differ depending on locale.
AC plug
DC plug
Power indicator
[ ] (Standby/On) switch