Kurzweil M3 W - Manual (Page 13)

Getting started 
Basic Operation Quick Start
Turning on/off
Adjusting the Volume
Using the Pedals
Playing the Voices

Press the Power switch to turn the power
on or off.

Rotate the 0DVWHU9ROXPH dial to
adjust sound volume level.

Turn on the power.

The Voice button LED is lit and the first voice
(1 Grand Piano) is ready to play.

To play another voice, press any category
button and play.

There are a number of different voices
available under each category button.
Press the Prev or Next button to step
through the available voices.

Press the desired Voice name button to select
the Bank 1 (upper) or Bank 2 (lower) voice.
Even when the instrument is turned off,
"$
QPXFS
JT
TUJMM
ýPXJOH
UP
UIF
BEBQUFS
BU

a minimum level. When you are not using
the instrument for a long time or during
electrical storms, unplug the AC power cord
from the wall outlet.
ƓBefore turning on/off 
t
#FGPSF
UVSOJOH
PO
UIF
.
EJHJUBM
QJBOP

JUhT

always a good idea to set the volume at its
minimum setting (all the way to the left). 9RLFH
5RFN 3RS
3LDQR
(QVHPEOH
5RFN 3RS
3LDQR
(QVHPEOH
t
4PGU pedal
The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal
will not affect notes that are already playing when it is pressed.
t
4PTUFOVUP pedal
If you play a note or chord on the keyboard and press the sostenuto pedal while the notes are held, those notes will
sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will
not be sustained. This makes it possible to sustain a chord, for example, while other notes are played "staccato".
t
Sustain pedal
The sustain pedal functions in the same way as the damper pedal on an acoustic piano.
When the damper pedal is pressed, notes sustain longer. Releasing the pedal immediately
stops any sustained notes.
1H[W 3UHY