Kurzweil M3 W - Manual (Page 23)

Getting the most 
Finding & Editing a Song
Erasing / Recording over Tracks
Punch-Ins
Punching in is a way to correct mistakes on a recording without re-recording the entire track.

Press the User Button located to the far left of the Rhythm bank.

Press the Prev or Next button to scroll through the list of User Presets (U1 – U20) to find your saved song.

Press the Play/Stop button to preview your saved song.
You are now ready for editing.

Select the user recorded song as above and press the Track button for the track you need to erase.

Press the Play/Stop button, then press the Record button and start playing into the track.

Press the Play/Stop button when you are finished.

Press the Save button to save the song with the new track.

Select the user recorded song and press the button for the track you need to change.

Press the Play/Stop button.
Your song begins to play.

When it reaches the part you need to correct, press the Record button and play the note(s) you need to punch-
into the recording.

After the punch-in, press the Play/Stop button.
If you don’t press the Play/Stop button after you Punch-In, you will erase the remaining portion of the track.

Press the Save button to save the song with the edited track.
7UDFN
7UDFN
5HFRUG
3OD\6WRS
3OD\6WRS
3OD\6WRS
3OD\6WRS
3OD\6WRS
8VHU
6DYH
6DYH
1H[W 3UHY