Kurzweil M3 W - Manual (Page 9)

Preparation 
Piano Assembly
Mounting the Keyboard
Connecting the Power Supply

Plug the thin DC power cord into the DC Power Jack on
the back of the M3 digital piano.
ȕCAUTION
All DC power adapters are NOT the same!
НOnly use the DC power adapter supplied with the M3 digital
piano.
Connecting the wrong DC power adapter could damage the M3
digital piano.
НIf the power adapter is damaged or lost, contact your Kurzweil
Dealer to order a replacement.
Before connecting the M3 digital piano’s power adapter,
Н0ake sure that the Power switch (located on the bottom right
corner of the instrument) is in the off position.

Insert the plug of the AC power cord into the AC
connector on the Adaptor, then plug the other end of
the cord into the proper AC outlet on the wall. In some
areas a plug adaptor may be provided to match the pin
configuration of the AC wall outlets in your area.

Press the Power switch located on the right of the front
panel to turn the power on.

Place the Ǭkeyboardon the stand and align with the
holes in the side panel brackets.
ȕWARNING
НThe keyboard assembly will not safely sit unsupported on the
legs until all of the screws are in place. Have someone hold the
keyboard assembly while the screws are being secured.

Fasten the keyboard to the side panel using the DZscrews.

Fasten the Ǭkeyboard to the front legs using the DZ
screws.

Insert the pedal cable plug into the pedal jack located on
the bottom of the keyboard.
Keyboard
Pedal cable
Screw for side panel
and keyboard
Screw for side panel
and keyboard
Screw for side panel
and pedal box

 
DC IN 24V
POWER
POWER
DC IN 24V
(The shape of the AC plug
differs depending on locale)

Rotate the pedal adjuster until it comes in firm contact
XJUI
UIF
ýPPS
TVSGBDF

*G
UIF
BEKVTUFS
JT
OPU
JO
åSN
DPOUBDU
XJUI
UIF
ýPPS

UIF

pedals will wobble and may malfunction.