Energizer 2103G - Manual (Page 24)

2103 Modem Module
Section 2 Installation and Operation
2-8
Click on the Site Info tab to display that screen (Figure 2-6).
Figure 2-6 Site Info Screen
Select Modem under the Connection Information section. Enter
the phone number to be used by the modem to connect to the site.
Click Apply (F9) to apply the changes.
2.5.1 Setting Up Text
Messaging
To program the 2103 for text messaging, you must have the Telo-
cator Al phanumeric Protocol (TAP) se rver number and
parameter settings of your cell phones and/or pagers.
1. Make sure you are connected to the site, and select the
Dialout Alarms tab (Figure 2-7).
Figure 2-7 Setting dialout phone numbers and alarm conditions