Philips AVENT SCF875/01 User Manual
Page 12
10
ENGLISH
1
Push the lid tab counterclockwise to release the lid from the jar (Fig. h).
2
If the blade unit is not in the jar, put it on the blade unit holder in the jar
(Fig. i).
3
We recommend cutting solid ingredients into small pieces (cubes not bigger
than 1cm).
4
Put the ingredients in the jar (Fig. j).
5
Press the sieve into the jar lid (Fig. k).
6
Place the jar lid on the jar and turn it clockwise to close it securely (Fig. l).
Note
• The jar has grooves that help smoothly guide the locking pins and lock the lid
in place. Make sure that the lid tab slides into the handle of the jar (Fig. m).
7
If you have not yet filled the water tank with water for steaming, refer to
the chapter “Filling the water tank” and add water to the water tank before
putting the jar on the main unit.
Note
• Make sure the water tank lid is correctly locked in place before placing the jar
on the main unit.
8
Flip the jar over with the jar lid on the bottom (Fig. n).
9
Align the connector on the jar lid to the locking area on the water tank, and
then place the jar on the main unit with the jar lid on the bottom (Fig. o).
Press the jar downwards to lock it firmly on the main unit, and make sure the
handle is on the right-hand side.
10
If the control knob is not in the off position (
OFF), turn it to the off position
first.
11
Plug in the appliance.
12
Turn the control knob to select the steaming time you need (Fig. p). Refer
to the table in the chapter “Ingredients and steaming time” and the recipe
booklet for the recommended steaming time.
»
The steaming light
will turn white to indicate that the appliance is
steaming.
»
When the steaming cycle is finished, the appliance will beep and the
steaming light will go out.
13
Turn the control knob back to the off position (
OFF) (Fig. q). Wait 2 minutes,
or until there is no more steam coming from the top of the appliance before
removing the jar.
Caution
• If you intend to start another steaming cycle, let the appliance cool down for
10 minutes, and empty any remaining water out of the water tank before you
refill and start a new steaming cycle.