Ingredients and steaming time – Philips AVENT SCF875/01 User Manual

Page 17

Advertising
background image

15

ENGLISH

1

Fill the water tank with water up to the MAX water level marking indicated on

the side of the water tank or the MAX water level indication in the water tank.

2

Follow steps 2 to 8 in the chapter “Reheating”.

3

Turn the control knob and select 30 minutes (Fig. }).

»

The steaming light

will turn white to indicate that the appliance is

defrosting.

4

When the defrosting cycle is finished, the appliance will beep and the

steaming light

will turn off.

5

Turn the control knob back to the off position (

OFF) (Fig. q). Wait 2 minutes,

or until there is no more steam coming from the top of the appliance before

removing the jar.

6

Open the lid and use the hook on the spatula to take the storage pot out

(Fig. |).

7

There may still be some water remaining in the water tank after a defrosting

cycle. This is normal. Wait until the appliance cools down to room

temperature, then empty the water tank of all residual water. To empty or

clean the water tank, refer to chapter “Cleaning and descaling”.

Note

• Only defrost the same batch of food once.

• After defrosting, we recommend running another reheating cycle to

thoroughly heat up the food.

Ingredients and steaming time

Type of food

Ingredient

Approximate

steaming time (min.)*

Water level in the

water tank (ml)

Fruit

Apple

15

160

Orange/mandarin 15

160

Peach

10

160

Pear

15

160

Pineapple

20

200

Plum

10

160

Strawberry

15

160

Vegetables

Asparagus

15

160

Broccoli

15

160

Carrot

20

200

Cauliflower

15

160

Celery

15

160

Eggplant

15

160

Fennel

15

160

French beans

20

200

Advertising