Other features (cont.) – MIDEA Dehumidifier MDP User Manual
Page 10
Page 10
Ope
rating
In
structions
Wait 3 minutes before resuming operation
After the unit has stopped, it can not be restarted in the first 3 minutes to protect
compressor operation. The unit will restart automatically after 3 minutes.
Auto-Restart
If the unit stops unexpectedly due to a power cut, it will restart with the previous
function setting automatically when the power resumes.
Setting the Timer ON and Timer OFF
•
When the unit is on, first press the Timer button, the Timer OFF indicator light
illuminates. It indicates the Timer OFF program is initiated. Press it again the Timer
ON indicator light illuminates.It indicates the Timer ON is initiated.
•
When the unit is off, first press the Timer button, the Timer ON indicator light
illuminates. It indicates the Timer ON program is initiated. Press it again the Timer
OFF indicator light illuminates. It indicates the Timer OFF is initiated.
•
Press or hold the
and
key buttons to change the Timer by 0.5 hour increments,
up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down
the time remaining until start.
•
The selected time will register in 5 seconds and the system will automatically revert
back to display the previous humidity setting.
•
When the Timer ON and Timer OFF times are set, within the same program
sequence, indicator lights illuminate identifying both ON and OFF times are now
programmed.
•
Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will
cancel the Timer function.
•
When LED display window displays the code of P2, the Auto Start/Stop function
will also be cancelled.
Other Features (cont.)
NOTES
• When first using the dehumidifier, operate the unit continuously 24 hours.
Make sure the plastic cover on the continuous drain hose outlet install tightly
properly so there are no leaks.
• This unit is designed to operate with a working environment between 5°C/41°F
and 35°C/95°F.
• Make sure the water bucket is positioned correctly so that the unit can operate
properly.
When the water in the bucket reaches to a certain level, please be
careful to move the unit to avoid it spill.