Removing collected water – MIDEA Dehumidifier MDP User Manual

Page 11

Advertising
background image

Page 11

Ope

rating

In

structions

Removing Collected Water

There are three ways to remove collected water:

1. Use the bucket

• When the unit is off, if the bucket is full, the F ull

indicator light will light.

• When the unit is on, if the bucket is full, the

compressor and the fan turn off, and the Full
indicator light will light, the digital display shows P2.

• Slowly pull out the bucket. Grip the left and right

handles securely, and carefully pull out straight so
water does not spill. Do not put the bucket on the
as because the bottom of the bucket is uneven.
Otherwise water may be spilled.

• Throw away the water and reposition the bucket.

• The unit will restart operation when the bucket back

in place.

1. Pull out the bucket.

2. Hold both sides of the

bucket evenly, and pull

it out from the unit.

3. Pour the water out.

Fig. 5

Fig. 6

NOTES

• When you remove the bucket, do not touch any

parts inside the unit. Doing so may damage the
product.

• Be sure to push the bucket gently all the way into

the unit.

• If the pump hose drops when you remove the

bucket (see Fig. 7), you must reinstall the pump
hose properly to the unit before replacing the
bucket into the unit (see Fig. 8).

• When the unit is on, if the bucket is removed, the

compressor and the fan turn off, then the unit will
beep 8 times and the digital display shows Eb.

• When the unit is off, if the bucket is removed,

the unit will beep 8 times and the digital display
shows Eb.

Fig. 8

Fig. 7

Pump hose drops

Reinstall pump

hose properly

Advertising
This manual is related to the following products: